Mini Link Craft 2 1977

Mini link tn configuration • 1. MiniLink TN Configuration1. Basic NE Configuration Go to NE Configure Basic NE NTP Server Setting (To synch. The time with server) Detail: Set ‘Continent’= Etc Set ‘City’= UTC Set ‘NTP Server’= 10.3.13.1 Automatic Backup Setting Detail: Set ‘Automatic Backup’= ‘to remote ftp server’ from drop down list PM Start Time Detail: Set ‘PM Start Time’= 00:00 Save the changes by clicking ‘Save’ button in craft • 2.

DCN Configuration Go to NE  Configure  DCN FTP Settings (To enable NE automatic backup and export of error logs) Detail: Set ‘Remote FTP Server’ ID = 10.3.13.1 Set ‘Username’= swdownload Set ‘Password’= #som# Save the changes by clicking ‘Save’ button in craft • 3. Radio Link Configuration Go to MMU  Configure Configure Radio Link Radio ID Change Detail: Open the ‘Configure Radio Link’ window and launch the far end as well Uncheck ‘Radio ID Check’ Option at both ends Save the changes by clicking ‘Save’ button in craft Set ‘Terminal ID’= As per plan Set ‘Far End ID’ = As per plan Save the changes by clicking ‘Save’ button in craft Tx Power Setting Detail: Check the link transmit power, RSL and frequency from LB.

The Flash Season 1 Hindi Dual Audio| 720p| 480p [Complete] Al l Episodes IMDB Rating: 8.0/10 The Flash TV-PG| 43min| Action, Adventure, Drama| TV Series (2014– ) Creators: Greg Berlanti, Geoff Johns, Andrew Kreisberg Stars: Grant Gustin, Candice Patton, Danielle Panabaker Story: Barry Allen is a Central City police forensic scientist with a reasonably happy life, despite the childhood trauma of a mysterious red and yellow lightning killing his mother and framing his father. The flash full movie in hindi 480p download 2017.

MINI-LINK Craft 2.19 A way to uninstall MINI-LINK Craft 2.19 from your computer MINI-LINK Craft 2.19 is a software application. This page contains details on how to uninstall it from your PC. J Connected — Indicates if MINI-LINK Craft is connected to the NE. 5.2 Menus This section describes the menus in MINI-LINK Craft. 5.2.1 Menus in MINI-LINK Craft Figure 2 MINI-LINK Craft Menu Bar 5.2.1.1 File menu Figure 3 MINI-LINK Craft File Menu Save.

• Check the ‘Output Power Mode’ settings. It should be ATPC for all 11GHz linkand RTPC for all other frequencies or stated otherwise in LB. LB must beconsulted for mode conformation.Note down the link if configuration is not as above.For ATPC links verify the following:‘Output Power’ should be set to max. Allowable limit.

Change the limitaccordingly.Save the changes by clicking ‘Save’ button in craft‘Target Input Power’ should be set to -50 dBm.Note down the link if ‘Target Input Power’ configuration is not as above. Nochanges should be done.Change the ‘Output Power’ according to LB if ‘Output Power Mode’=RTPC. Incase of 1+1 link, changes must be done on all RAUs.Save the changes by clicking ‘Save’ button in craftFrequency CheckIn case of frequency conflict, no activity needs to be performed. Please notedown the link.

• RF Input Alarm Threshold Detail: Open ‘Advanced’ menu for both ends. For links with RTPC settings: Set ‘RF Input alarm threshold’= 8dBm less than design RSL. For links with ATPC settings: Set ‘RF Input alarm threshold’= -55 dBm Save the changes by clicking ‘Save’ button in craft4. Switch Configuration Expand MMU  RAU IF Go to SWITCH  Configure  Protection For 1+1 links verify the switch configuration settings. • ‘Switch Mode’ must be set = ‘Automatic’ at both ends.Change the settings to ‘Automatic’ if not done alreadySave the changes by clicking ‘Save’ button in craft.

Mini link tn configuration • 1. MiniLink TN Configuration1. Basic NE Configuration Go to NE Configure Basic NE NTP Server Setting (To synch. The time with server) Detail: Set ‘Continent’= Etc Set ‘City’= UTC Set ‘NTP Server’= 10.3.13.1 Automatic Backup Setting Detail: Set ‘Automatic Backup’= ‘to remote ftp server’ from drop down list PM Start Time Detail: Set ‘PM Start Time’= 00:00 Save the changes by clicking ‘Save’ button in craft • 2. DCN Configuration Go to NE  Configure  DCN FTP Settings (To enable NE automatic backup and export of error logs) Detail: Set ‘Remote FTP Server’ ID = 10.3.13.1 Set ‘Username’= swdownload Set ‘Password’= #som# Save the changes by clicking ‘Save’ button in craft • 3. Radio Link Configuration Go to MMU  Configure Configure Radio Link Radio ID Change Detail: Open the ‘Configure Radio Link’ window and launch the far end as well Uncheck ‘Radio ID Check’ Option at both ends Save the changes by clicking ‘Save’ button in craft Set ‘Terminal ID’= As per plan Set ‘Far End ID’ = As per plan Save the changes by clicking ‘Save’ button in craft Tx Power Setting Detail: Check the link transmit power, RSL and frequency from LB.

• Check the ‘Output Power Mode’ settings. It should be ATPC for all 11GHz linkand RTPC for all other frequencies or stated otherwise in LB. LB must beconsulted for mode conformation.Note down the link if configuration is not as above.For ATPC links verify the following:‘Output Power’ should be set to max.

Allowable limit. Change the limitaccordingly.Save the changes by clicking ‘Save’ button in craft‘Target Input Power’ should be set to -50 dBm.Note down the link if ‘Target Input Power’ configuration is not as above. Nochanges should be done.Change the ‘Output Power’ according to LB if ‘Output Power Mode’=RTPC. Incase of 1+1 link, changes must be done on all RAUs.Save the changes by clicking ‘Save’ button in craftFrequency CheckIn case of frequency conflict, no activity needs to be performed.